Xlam Corporate Private Limited

Introduction
Model: LFM-360S Hot and Cold Laminator with Foil Stamping
Brand: Xlam Corporate Pvt Ltd
The LFM-360S Hot and Cold Laminator from Xlam Corporate Pvt Ltd is a versatile and high-performance laminating machine designed to meet the demands of modern print finishing. Built for precision and durability, it supports both hot and cold lamination processes, making it suitable for a wide variety of applications including photo lamination, ID cards, menus, documents, posters, and more.
This model is ideal for offices, copy shops, commercial printing, and digital printing environments. With a compact design and powerful functionality, the LFM-360S offers consistent output, user-friendly operation, and long-lasting performance.
Technical Specifications – LFM-360S
SpecificationDetails
Model No. : LFM-360S
Max. Laminating Width : 360 mm
Max. Laminating Speed  : 3000 mm/min
Max. Laminating Temperature : 160C
Max. Laminating Thickness : 7 mm
Power Supply : AC110V / 220V, 50Hz / 60Hz
Power Consumption : 600 W
Machine Dimensions : 620 mm × 530 mm × 280 mm
Weight : 30 Kg
Core Size Compatibility : 1 inch, 3 inches
✅ How to Use: LFM-360S Hot and Cold Laminator
 
1. Power Connection
 
   * Plug the machine into a standard power source (AC110V or 220V, 50/60Hz).
 
2. Turn ON the Machine
 
   * Use the power switch to turn on the laminator.
 
3. Set Lamination Mode
 
   * Choose Hot Lamination or Cold Lamination as required.
   * For hot lamination, wait until the machine reaches the desired temperature.
 
4. Adjust Temperature
 
   * Set the temperature using the control panel.
   * Max temperature: 160°C (for hot lamination).
   * For cold lamination, no heat is required.
 
5. Set Lamination Speed
 
   * Adjust the speed depending on the type of lamination film and document.
   * Max speed: 3000 mm/min
 
6. Load Film Roll
 
   * Mount the laminating film on the roller using the appropriate core size (1 inch or 3 inches)
   * Make sure the film is aligned properly.
 
7. Insert Document
 
   * Place the document to be laminated between the film layers.
   * Insert it smoothly into the feed entry.
 
8. Start Lamination
 
   * The rollers will pull the document through the machine.
   * Monitor the output for bubbles or wrinkles.
 
9. Cut the Laminated Output
 
   * Once laminated, trim the excess film using a cutter or scissors.
 
10. Turn Off the Machine
 
    * Switch off the machine after use and unplug it safely.
 
    * Allow it to cool before storing.